【Summary description】The installation of the press machine on the time axis and axis is not correct, but the difference is that it is a bit large and the two axes are slightly tilted. There are too many impurities and dirt in some spherical bearings or oil. Bush also has some different types of excessive wear and tear.
【Summary description】The installation of the press machine on the time axis and axis is not correct, but the difference is that it is a bit large and the two axes are slightly tilted. There are too many impurities and dirt in some spherical bearings or oil. Bush also has some different types of excessive wear and tear.
The installation of the press machine on the time axis and axis is not correct, but the difference is that it is a bit large and the two axes are slightly tilted. There are too many impurities and dirt in some spherical bearings or oil. Bush also has some different types of excessive wear and tear. The connection between the outer spherical bearings and the neck cannot be self checked or exposed to a small amount of compressed air per unit area, which usually occurs when attempting to run or modify a new bearing on a new computer. Spherical bearings and some places where the house tilts in one direction or at a point where the crank is slightly bent and twisted. Bush is not prepared to use oil quality or viscosity standards or oil blockage methods in terms of quality. The oil pressure is too low in the air tank, and this time the oil is in the middle, which leads to a lack of oil bearing supply and grinding between each other.
The elimination method for spherical bearings: 1 oil, clean and replace a new machine, and clean the oil pressure and air between your machines. 2. Use staining method to scratch the bearing, allowing it to touch the area to meet the requirements and change the pressure in the area. 3. Replace the spherical bearings for housing with new ones, check the oil pipes and tanks, use a good type of oil, and adjust the tank pressure to meet certain requirements. 4. Reasonably adjust the spherical bearing, check the gap, and see if there is any bending phenomenon. The new shaft is bent, or if there are any changes, it is clear.
扫二维码用手机看
Related information
Looking forward to working together with you for a win-win situation！
About us
News Center
Contact Us
Contact Us
Contact: Manager Wang
Tel： 13867819622
E-mail： ctz@ctz-bearing.com
Dongfa Road, Cidong Industrial Zone, Longshan Town, Cixi City, Zhejiang Province
Copyright © CIXI CTZ BEARING CO.,LTD. 浙ICP备2024090620号
